| @@ -2,6 +2,2 @@ |
| - Controller: Adaptec ASR-5405Z 512MB (aacraid driver)
|
| - Server: srv9 — AMD FX-6300, M5A78L-M USB3, 32GB RAM
|
| - SAS Drives:
|
| - Seagate Exos ST8000NM0075 8TB (LENOVO-X branded) — /media3
|
| - Second identical drive arrived later — /media4
|
| - SATA Drives: Also connected via controller
|
|
- Controller: Adaptec ASR-5405Z 512MB (aacraid driver) - Server: srv9 — AMD FX-6300, M5A78L-M USB3, 32GB RAM - SAS Drives: - Seagate Exos ST8000NM0075 8TB (LENOVO-X branded) — /media3 - Second identical drive arrived later — /media4 - SATA Drives: Also connected via controller |
|
|
| @@ -10,4 +6,2 @@ |
| - Controller visible in dmesg/sg_map but no block device created
|
| - `/dev/sg2` showed `PQual=1` "LU temporarily unavailable"
|
| - All tools hanging — arcconf, sg commands etc
|
| - Controller was trying to build arrays, corrupted SATA partition tables!
|
|
- Controller visible in dmesg/sg_map but no block device created - `/dev/sg2` showed `PQual=1` "LU temporarily unavailable" - All tools hanging — arcconf, sg commands etc - Controller was trying to build arrays, corrupted SATA partition tables! |
|
|
| @@ -16,4 +9,0 @@ |
| arcconf (Adaptec management CLI) — version maze:
|
| - V4 — hangs waiting for controller to be ready
|
| - V3 — "Controllers found: 0"
|
| - Working middle version found on Microchip site
|
|
|
| @@ -21,2 +11,4 @@ |
| Key commands:
|
| {code}# Check physical devices
|
arcconf (Adaptec management CLI) — version maze: - V4 — hangs waiting for controller to be ready - V3 — "Controllers found: 0" - Working middle version found on Microchip site Key commands: |
|
| {code} |
| # Check physical devices |
|
|
|
| @@ -35,4 +27,2 @@ |
| - ASR-5405Z is hardware RAID controller — no passthrough mode
|
| - Must explicitly create JBOD before OS sees disk as block device
|
| - Without JBOD: controller holds disk in "temporarily unavailable" state
|
| - JBOD config lives in controller flash, not on disk
|
|
- ASR-5405Z is hardware RAID controller — no passthrough mode - Must explicitly create JBOD before OS sees disk as block device - Without JBOD: controller holds disk in "temporarily unavailable" state - JBOD config lives in controller flash, not on disk |
|
|
| @@ -41,3 +31,2 @@ |
| - XFS chosen over ext4 for media storage
|
| - Reasons: large files (TV recordings), no reserved blocks (saves ~400GB on 8TB), better performance when nearly full
|
| - Both drives formatted XFS, mounted /media3 and /media4
|
|
- XFS chosen over ext4 for media storage - Reasons: large files (TV recordings), no reserved blocks (saves ~400GB on 8TB), better performance when nearly full - Both drives formatted XFS, mounted /media3 and /media4 |
|
|
| @@ -46,3 +35,2 @@ |
| - Same process but smoother — crib sheet worked!
|
| - Controller showed drive as Ready immediately
|
| - JBOD created, partitioned, formatted, mounted
|
|
- Same process but smoother — crib sheet worked! - Controller showed drive as Ready immediately - JBOD created, partitioned, formatted, mounted |
|
|
| @@ -51,4 +38,0 @@ |
| - Controller needs time to initialise — wait for "Ready" in arcconf before creating JBOD
|
| - arcconf JBOD config survives reboots but not moving to different controller
|
| - Moving drive to new machine needs JBOD recreated
|
| - SATA drives also need JBOD if connected via this controller!
|
|
|
| @@ -56,2 +40 @@ |
Cribsheet
|
| https://myhomecloud.uk/wiki/ASR-5405Z+Configuration+Notes
|
- Controller needs time to initialise — wait for "Ready" in arcconf before creating JBOD - arcconf JBOD config survives reboots but not moving to different controller - Moving drive to new machine needs JBOD recreated - SATA drives also need JBOD if connected via this controller! |
|
|
| @@ -59,8 +42 @@ |
| ---
|
|
|
{code} in Bitweaver — Fixed! 🎉
|
|
|
The Problem
|
| - `{code}` smarty blocks not rendering in wiki/blog pages
|
| - CKEditor mangling smarty tags
|
| - Had been broken for some time
|
Cribsheet |
|
|
| @@ -68,4 +44 @@ |
Claude Code Fixed It
|
| - Used Claude Code to diagnose and fix
|
| - Now working properly
|
| - Cribsheets can now use proper code blocks!
|
((ASR-5405Z Configuration Notes)) |
|
|
| @@ -73,4 +46 @@ |
Impact
|
| - Wiki pages with code examples now display correctly
|
| - Makes technical documentation much more useful
|
| - All the cribsheets from this conversation can be updated! 😄
|
Developed with [Claude AI](https://claude.ai) assistance - Anthropic - May 2026 |
|
|
| @@ -78,7 +47,0 @@ |
Remaining Cribsheet Updates Needed
|
| - ASR-5405Z page
|
| - PHP84 Protection
|
| - Fail2ban setup
|
| - Git workflow
|
| - Webstack setup
|
| - All can now use `{code}` blocks properly! |
|
|
